Sensors for smart chainflex® cables

Cable quality monitoring CF.Q

Avoid unplanned system downtimes due to cable failures when using chainflex® cable outside the chainflex® warranty conditions!
Recognise mechanical stress of chainflex® cable under extreme operating conditions at an early stage.
Plan maintenance work cost-effectively in advance

How CF.Q works

The isense CF.Q module is used for the early detection of changes in the electrical specification of chainflex® cables due to the mechanical load during operation in a igus® e-chain system®. For this purpose, the electrical resistance of a dedicated conductor loop is measured during operation. Temperature-related changes in resistance are compensated for by means of PT100 measurement at the installation location of the cable. Data is continuously analysed by igus® 's own microprocessor-based algorithms. These form both arithmetic and sliding mean values of the measured resistance values approx. 50 times per second and analyse these in a temporal context.
If the system detects a permanent change in the electrical specification, it recommends replacing the cable as soon as possible by switching a potential-free contact. If the cable is not replaced, the system switches off the system as a precaution in the event of a complete core rupture.

For later investigations, the system logs all measured values that led to the warning and switch-off.

Possibilities to integrate CF.Q:

Variant 1

as a sacrificial cable

With this variant, you still need space to run an additional cable in the e-chain®, as the CF.Q is run as a "sacrificial cable" in the e-chain®.
All cores of the cable are "connected in series" and connected to the measurement input of the module.
Advantage: All cores are measured, so there is no need to select the most frequently used core.
Disadvantage: Regardless of the production batch and assembly method, cables from the same production batch can also achieve different lifetimes.

Variant 2

Unused core of a cable

In the cable to be monitored, two unused cores are defined as measurement cores and, if necessary, routed to the measurement connections of the CF.QA module using a shielded extension cable.
This often requires a modification to the connector assembly, as the two cores must be led out of the connector at the cable entry on the distributor side.
Advantage: The cable actually used by the customer is monitored
Disadvantage: The original cable often has to be replaced by a variant with two additional cores, which usually increases the cable diameter, and the apparently "weakest" core should be selected.

An I4.0 success story from the field

Application: Bread packaging machine
What was needed: smart energy management
Requirements: preventive cable monitoring
Product: CF.Q top-hat rail module
Area of application: Automation of any kind
Success for the customer: The company GHD Georg Hartmann Maschinenbau was looking for a reliable energy supply system including preventive monitoring for its packaging machines in order to avoid machine failures

Go to the application report

Do you want to put together your own smart plastic package?

Then download the digital version of our smart plastic Domino now and put together your very own configuration.

You can then look forward to a playful gift from smart plastic.

Arrange a personal visit

Download smart plastics Domino (PDF)

Back to the smart plastics overview

Consulting

I look forward to answering your questions

igus Australia Pty Ltd1300 726 244 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 8 am - 5 pm.