My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

Bar stock for motion

The round rods made of of the iglidur® range of bar stock can be ordered in individual lengths from 100 mm to 1000 mm and with a diameter of 10 mm to 100 mm. We offer different materials to meet the different requirements of each application. Here, you can find the right round-rod material - whether for low, medium or high speeds, for temperatures up to 250 °C or for mainly stationary or extreme loads, in other words for almost every requirement.
Like every igus® product, the round rods are also suitable for absolutely lubrication-free use and are therefore not only maintenance-free but are also especially hygienic.
For example, iglidur® round rods are used in the area of medical technology and in the food and packaging industry.

Filter

Core Requirements
Requirements
Material

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 29

iglidur® A350, round bar
  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     

38.02 USD/m

2 ready for shipping in 24 - 48 hours
10 ready for shipping in 48 - 72 hours
To the product page
iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

10.30 USD/m

4 ready for shipping in 24 - 48 hours
5 ready for shipping in 48 - 72 hours
To the product page
iglidur® X, round bar
  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength

82.19 USD/m

12 ready for shipping in 48 - 72 hours
To the product page
iglidur® A180, round bar
  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance

9.91 USD/m

11 ready for shipping in 48 - 72 hours
To the product page
iglidur® JB, round bar
  • Low wear
  • Low coefficient of friction
  • Low humidity absorption
  • Good media resistance

57.85 USD/m

5 ready for shipping in 48 - 72 hours
To the product page
iglidur® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free

18.68 USD/m

9 ready for shipping in 48 - 72 hours
To the product page
iglidur® A181, round bar
  • For use with temperatures up to +90 °C
  • The food grade material, FDA and EC regulation 10/2011 EC compliant
  • Good media resistance

20.08 USD/m

8 ready for shipping in 48 - 72 hours
To the product page
iglidur® T220, round bar
  • For the tobacco industry
  • Free from banned ingredients as requested by main manufacturers of tobacco products
  • Lubrication and maintenance-free

91.34 USD/m

3 ready for shipping in 48 - 72 hours
To the product page
iglidur® A250, round bar
  • Wear-resistant
  • FDA and EU10/2011 compliant
  • Low drive power required when used for rollers
  • Lubrication-free belt deflection

Upon request

1 ready for shipping in 48 - 72 hours
To the product page
iglidur® J4, round bar
  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption

22.00 USD/m

14 ready for shipping in 48 - 72 hours
To the product page
iglidur® J200, round bar
  • Very long service life with hard anodised aluminium
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Lubrication and maintenance-free

Upon request

3 ready for shipping in 48 - 72 hours
To the product page
iglidur® P210, round bar
  • Low moisture absorption
  • Good coefficients of friction and wear on almost every shaft
  • Good price/performance ratio

80.23 USD/m

10 ready for shipping in 48 - 72 hours
To the product page
iglidur® H1, round bar
  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free

91.88 USD/m

7 ready for shipping in 48 - 72 hours
To the product page
iglidur® C500, round bar
  • High resistance to media and temperature
  • Resistant to water vapour
  • Good coefficients of wear and friction

113.90 USD/m

8 ready for shipping in 48 - 72 hours
To the product page
iglidur® HSD350, round bar
  • Sterilisable
  • For continuous use up to +180 °C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • Lubrication and maintenance-free

234.22 USD/m

1 ready for shipping in 48 - 72 hours
To the product page

Consulting

We would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h