iglidur® Q2 - material data

Table of contents

The most important specifications at a glance

Descriptive technical specifications
Wear resistance at +23°C- 🟧 🟧 🟧 ⬜️ ⬜️ +
Wear resistance at +90°C- 🟧 🟧 ⬜️ ⬜️ ⬜️ +
Wear resistance at +150°C- 🟧 🟧 ⬜️ ⬜️ ⬜️ +
Slide property- 🟧 🟧 🟧 ⬜️ ⬜️ +Coefficient of friction, dynamic, against steel: µ 0.22 – 0.42
Wear resistance under water- 🟧 ⬜️ ⬜️ ⬜️ ⬜️ +
Media resistance- 🟧 🟧 🟧 ⬜️ ⬜️ +
Resistant to edge pressures- 🟧 🟧 🟧 🟧 🟧 +
Resistant to shock and impact loads- 🟧 🟧 🟧 🟧 🟧 +
Dirt resistance- 🟧 🟧 🟧 🟧 🟧 +

When do I use this material?

  • When high dynamic loads occur
  • When dirt occurs in addition to high impact and shock loads
  • For highly loaded pivoting applications

When do I use a different material?

Temperatures

min. application temperatureUpper application temperature, long-termUpper application temperature, short-termIn addition secure axially from
-40°C+130°C+200°C+70°C

Permissible surface speeds

Maximum surface speed [m/s]RotatingOscillatinglinear
Long-term1.00.74.0
Short-term2.01.45.0

Permissible pv values

Chart with logarithmic X and Y axes and a declining curve.
Chart with logarithmic X and Y axes and a declining curve.

Mechanical properties

Characteristic curve with a downward trend along X and Y.
Chart with two rising lines for +23 °C and +60 °C on X and Y.

Friction and wear

iglidur Q2dryGreasesOilWater
Coefficient of friction μ0.22 - 0.420.090.040.04
Line graph with a rising curve on the X and Y axes.
Characteristic curve of iglidur Q2: drops steeply and levels off from x=20.

Shaft materials

Bar chart with categories A to E; C has the highest value and B the lowest.
Chart with two curves A and B: A rises more sharply and ends at 670, B rises more gradually to about 75.

Chemical resistance

MediumResistance
Alcohols+
Greases. Oils without additives+
Hydrocarbons+
Fuels+
Strong alkalines0
Strong acids-
Diluted alkalines+
Diluted acids0 to -

Moisture absorption

Graph with a linearly rising curve from X to Y.

Installation tolerances

Diameter d1 [mm]Housing H7 [mm]iglidur Q2 plain bearing E10 [mm]Shaft h9 [mm]
up to 3+0.000 +0.010+0.014 +0.054-0.025 +0.000
> 3 up to 6+0.000 +0.012+0.020 +0.068 -0.030 +0.000
> 6 up to 10+0.000 +0.015+0.025 +0.083-0.036 +0.000
> 10 up to 18+0.000 +0.018+0.032 +0.102-0.043 +0.000
> 18 up to 30+0.000 +0.021+0.040 +0.124-0.052 +0.000
> 30 up to 50+0.000 +0.025+0.050 +0.150 -0.062 +0.000
>50 to 80+0.000 +0.030+0.060 +0.180-0.074 +0.000
>80 to 120+0.000 +0.035+0.072 +0.212-0.087 +0.000
> 120 up to 180+0.000 +0.040 +0.085 +0.245-0.100 +0.000

Thermal conductivity

Coefficient of thermal expansion

Compressive strength

Vacuum

Radioactive radiation

Typical application areas

Combine harvester in a grain field.

Agricultural engineering

Tipper truck with marked bearing points and iglidur Q2E for heavy machinery.

Construction vehicles

Truck with deployed tail lift and visible equipment for patient transport.

Commercial vehicles

Consulting

I look forward to answering your questions

Shipping and consultation