Adapter for easy connection of the energy chain

adapter Module Connect

Module Connect adapter - saves installation time.
The new Module Connect adapter is specially designed to make the interface concept, Module Connect and to connect the energy chain with its cables even more easily. The pre-assembled e-chain® is a coherent system and can be installed directly.

The e-chain® and the Module Connect are standardised. Depending on the chain series, chain width and number of Module Connect connectors, a customised chain adapter is produced using 3D printing. (The possibility of a plastic injection-moulded part can also be tested.) The adapter is simply attached to the Module Connect and can then be attached to the chain using a snap-in mechanism.

This means that the entire assembly of a readychain® standard, including Module Connect, is a coherent system, i.e. the connector assignment and cable lengths are clearly defined.

Make a request now

Tech up triangle

Tech up

Fitted without additional sheet metal parts
Flexible: simple clip fastening for wall and floor
Safe: integrated strain relief and seal
Suitable: Configure interface by combining individual housings into one connector

Cost down triangle

Cost down

80% assembly time save
Ready-to-install assemblies optimise handling
For service: unplug it, plug it back in, done

Proof square

Proof

Module Connect: Red Dot Design Award Winner 2018
Module Connect adapter: German Design Award Winner 2021
cost-effective interface solution: a connector instead of many individual connectors
Nearly Freely configurable

Sustainability circle

Sustainability

Existing igus energy supply systems can be supplemented
Adapters from the 3D printing process are suitable for chain width and chain height

Fast assembly

For this purpose, we have developed the Module Connect adapter.

Wherever fast reaction times are required, e.g in the event of a fault, the Module Connect adapter ensures a fast connection of the energy supply system and avoids long downtimes.

For example, in an automatic parking system, the customer leaves his car for parking. The car is weighed and measured by the system and automatically moved into a suitable parking position.
If there is a downtime due to a cable break in the e-chain or a leakage in the pneumatic hose, for example, every service technician should be able to disconnect the defective energy chain and connect a new, harnessed energy chain. With the adapter, this is possible quickly and easily - without the need for basic electronic knowledge.

Module Connect adapters are not only used in automatic parking systems and ensure fast maintenance but also in production or pharmacy systems and wherever energy supply systems need to be plugged in.

Automatic parking system

Request: Module Connect adapter

Module Connect adapter

Enquire about the Module Connect adapter now
Let us know your requirements and we will develop your customised interface with the right adapter depending on the chain series, width and number of Module Connect connectors.

Request adapter here

Module Connect

Module Connect

ONE interface for plugging in the energy supply
Module Connect can be adapted to the filling and geometry of your e-chain® and thus enables cabling that is optimised in terms of function and design for every application.

Go to Module Connect

readychain complete system

readychain

Do you need a complete cable carrier system?
From the procurement of all the necessary components to the assembly of the ready-to-install system, we take care of the entire procurement logistics. Save up to 95% on assembly time!

Go to readychain overview

Consulting

I look forward to answering your questions

igus Australia Pty Ltd1300 726 244 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 8 am - 5 pm.