iglidur® HSD350, sleeve bearing, mm - HSD350SM

iglidur® HSD350 | Media-resistant and hygienic at low cost

The new material enables continuous hygienic use, including regular sterilisation, at an excellent price/performance ratio.

Typical application areas

Fluid technology
Medical technology

Here you will find further possible applications:
Industry solutions

 

When to use it? If the bearing point is regularly sterilised with hot steam When a low-cost material is required at the same time When good chemical resistance is required Low humidity absorption

When not to use it? When high pressure loads occur iglidur® G, sleeve bearing, mm iglidur® W300, sleeve bearing, mm When short-term temperatures higher than +120°C occur iglidur® G, sleeve bearing, mm iglidur® Z, sleeve bearing, mm When a cost-effective bearing is sought for occasional movement iglidur® G, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining