Clevis joint, mm
Clevis joint with and without pin and circlip.
Very low weight
High tensile forces
Combinable with rod end bearings of the dimensional series E
Available for left-hand and right-hand threads
igubal® clevis joints are solid polymer made of igumid G according to DIN 71752, which can be combined with the rod end bearings of the dimensional series E as counterpiece.
They consist of clevis joint, pin and circlip, or alternatively with spring loaded pin.
If high stiffness is required
If corrosion resistance is required
If no lubrication is to be used
If you want to save weight
If maintenance-free, dry operation is required
If simple assembly is required
In combination with pneumatic cylinders and gas struts
When temperatures above +200°C prevail
When dimensions over 20 mm are needed
More than 100.000 products in stock at igus®. igus® shipping and order processing from 7AM to 8PM (Mon-Fri), 8AM-12PM (Sat)!Newsletter Registration Terms and Conditions Imprint General Information Data Privacy Protection Declaration